This is a guide to make changes to the HP ProLiant N54l Microserver BIOS to enable Hot-Swapping of drives and enable the motherboard (5th) SATA port to run at full speed. Before following this guide, you’ll need modified BIOS on your N54l, to carry this out see THIS post. Assuming that you now have modified BIOS, turn on the server and go into BIOS. From the main screen go to ‘Chipset > Southbridge Configuration > SB SATA Configuration’ and make sure your settings are the same as below: OnChip SATA Channel = Enabled OnChip IDE Type = IDE SATA IDE […]
↧